Phone stuck in the samsung logo ! is my phone bricked ?

**crush** · 08-13-2010, 01:36 AM

Hello everyone I was using Samdroid mod without any problem but now I am stuck with a problem. I applied EXXJE1 to my phone using odin. but now my phone is stuck on the starting Samsung logo. It doesnt show any progress bar. I tried flashing back to JCE and JC4 and even JC1. but same result.

has anyone faced this before ? what should I do. I dont have warrenty on my phone as it was imported from singapore. Can anyone please help

---------- Post added at 04:36 AM ---------- Previous post was at 04:17 AM ----------

I fixed it !! wow. i almost was gonna cry. I followed this tutorial :

Keep spica_jc3.ops in Select OPS field.
Click Reset Files to clear the fields.
In Select Images to download panel, Select I570EXXJA1_CLI32638_Bootloader.tar into BOOT field,I570XXJB4_Phone.tar into PHONE field, I570EOLBJB3-CSC-CL167487-OLB.tar into CSA field, and let the PDAfield empty.
In Debug Option panel, tick Debug Only and PDA Format option. Don’t tick One Package option in Option Panel.
Click Start and watch the progress bar and timer, wait untill PASS message appear on Message box.
Disconect the phone from PC, remove and insert the battery, start the phone in download mode again then continue to Flash III.

then:

Keep spica_jc3.ops in Select OPS field.
Click Reset Files to clean the fields.
In Select Images to download panel, Select I570EXXJCE.tar into PDA field.
If you get an error dialog, rename the I570EXXJCE.tar into I570EXXJCE_PDA.tar and insert into PDA field again.
Don’t select One Package option and Debug Option.
Click Start and watch the progress bar and timer, wait untill PASS message appear on Message box.
The phone will restart and you will get the Eclair screen .

**H3LLBOY911** · 08-13-2010, 01:41 AM

LoL you started and ended the thread yourself.

**crush** · 08-13-2010, 12:04 PM

Originally Posted by anuragthehellboy

LoL you started and ended the thread yourself.

haha yes. i searched around but couldnt find any solution before. But i saw some people face the exact problem. hopefully this thread will help the future victims :P

**rudim** · 08-14-2010, 10:55 AM

Originally Posted by crush

haha yes. i searched around but couldnt find any solution before. But i saw some people face the exact problem. hopefully this thread will help the future victims :P

Ya your thread is personal problem
so anyone could learn from what you're did
great job

**mattish.91** · 08-29-2010, 10:47 PM

Thanks you fixed my problem <3

**WoNHommer** · 08-29-2010, 11:33 PM

What I learned from my (little) experience and (a lot longer) research is that your phone will never be bricked if you're stuck at the boot logo. What I found out is that there's always a solution for a case like this. Your phone will be permanently bricked if you can't get into recovery AND can't flash anything using Odin/can't get to download mode. If you can do any of those, specially flashing with Odin, you're phone is most likely not bricked. Of course these are assumptions I made based on what I've seen around.

**honestloez** · 03-10-2011, 05:16 PM

Originally Posted by crush

Hello everyone I was using Samdroid mod without any problem but now I am stuck with a problem. I applied EXXJE1 to my phone using odin. but now my phone is stuck on the starting Samsung logo. It doesnt show any progress bar. I tried flashing back to JCE and JC4 and even JC1. but same result.

has anyone faced this before ? what should I do. I dont have warrenty on my phone as it was imported from singapore. Can anyone please help

---------- Post added at 04:36 AM ---------- Previous post was at 04:17 AM ----------

I fixed it !! wow. i almost was gonna cry. I followed this tutorial :

Keep spica_jc3.ops in Select OPS field.
Click Reset Files to clear the fields.
In Select Images to download panel, Select I570EXXJA1_CLI32638_Bootloader.tar into BOOT field,I570XXJB4_Phone.tar into PHONE field, I570EOLBJB3-CSC-CL167487-OLB.tar into CSA field, and let the PDAfield empty.
In Debug Option panel, tick Debug Only and PDA Format option. Don’t tick One Package option in Option Panel.
Click Start and watch the progress bar and timer, wait untill PASS message appear on Message box.
Disconect the phone from PC, remove and insert the battery, start the phone in download mode again then continue to Flash III.

then:

Keep spica_jc3.ops in Select OPS field.
Click Reset Files to clean the fields.
In Select Images to download panel, Select I570EXXJCE.tar into PDA field.
If you get an error dialog, rename the I570EXXJCE.tar into I570EXXJCE_PDA.tar and insert into PDA field again.
Don’t select One Package option and Debug Option.
Click Start and watch the progress bar and timer, wait untill PASS message appear on Message box.
The phone will restart and you will get the Eclair screen .

Hi, where can i find these files? I'm facing the exactly same problem. Thank you in advance